Part Number Search:  


Installation Tools - Breakstem Rivets
Search By Fastener - Click Here to find tools based on your fastener part number.

Product Specs Key Features

Air Pressure: 70 - 120 psi.
Cycle Time: approx. 2.4 seconds
Noise Level: <70 dB(A)
Pull Force: 875 lbf.
Stroke: 0.75"
Weight: 5.17 lb. (without nose equipement)
Standard Setup: Nose equipment, mandrel and spring purchased separately.
727 (PNEUMATIC)
• Ideal for areas with restricted access
• Can be suspended or hand held
• High capacity magazine
• Places the entire range of Avdel® speed fasteners with a simple modification

Air Pressure: 70 - 100 psi.
Cycle Time: approx. 1 seconds
Noise Level: <70 dB(A)
Pull Force: 875 lbf.
Stroke: 1.18"
Weight: 2.64 lb. (without nose equipement)
Standard Setup: Nose equipment, mandrel and spring purchased separately.
7530 (HYDRO-PNEUMATIC)
• Repetitive, multiple fastener feed for high speed, consistent assembly
• High precision tool for high quality assembly
• Lightweight, ergonomic design, connected to a separate intensifier for assemblies with restricted access
• Can be hand held or suspended
• Average cycle time of just one second
• High capacity magazine and simple to reload
• No recoil allows soft setting of fasteners
• A range of nose equipment is available to suit different access requirements

Air Pressure: 70 - 100 psi.
Cycle Time: approx. 1 seconds
Noise Level: <70 dB(A)
Pull Force: 875 lbf.
Stroke: 1.18"
Weight: 2.64 lb. (without nose equipement or balance arm)
Standard Setup: Nose equipment, mandrel and spring purchased separately.
7535 (HYDRO-PNEUMATIC)
• Tool supported on an extendable arm for maximum flexibility
• Wide arm reach to over 0.8m
• Repetitive, multiple fastener feed for high speed, consistent assembly
• Single hand operation
• High capacity magazine and simple to reload
• Arm can be moved to make space for other tasks
• Intensifier can be bench or floor mounted

Air Pressure: 70 - 100 psi.
Cycle Time: approx. 1 seconds
Noise Level: <70 dB(A)
Pull Force: 875 lbf.
Stroke: 1"
Weight: 2.64 lb. (without nose equipement or hose)
Standard Setup: Nose equipment, mandrel and spring purchased separately.
7536 (HYDRO-PNEUMATIC)
• Lightweight tool with separate intensifier
• Control box and air cursor for use of small diameter fastenings
• Uses hydraulics for placing fasteners reducing shock loads
• Uses the same placing equipment and common parts of the 7530 tool
• Long reach barrel
• Can be suspended from a balancer (optional)

Air Pressure: 70 - 100 psi.
Cycle Time: approx. 1 seconds
Noise Level: <70 dB(A)
Pull Force: 875 lbf.
Stroke: 1.10"
Weight: 5.06 lb.
Standard Setup: Nose equipment, mandrel and spring purchased separately.
7537 (HYDRO-PNEUMATIC)
• Ergonomic design, lightweight tool
• Intensifier made integral to the hand tool
• Can be suspended (optional)
• Use hydraulic for placing fasteners (reduced shock loads)
• Utilizes standard 753 nose equipment
• Can place the same range of fasteners as 7530 tool
• Specially toughened plastic body and heavy duty rubber base
• Integral cycle counter

Air Pressure: 87 psi.
Cycle Time: approx. 1 seconds
Noise Level: 75 dB(A)
Standard Setup: Nose equipment, mandrel and spring purchased separately.
7539 (HYDRO-PNEUMATIC)
• Available in three configurations
• Ergonomic design
• High mobility and easy integration into the production process
• Use hydraulic for placing fasteners (reduced shock loads)
• Utilizes standard 753 nose equipment
• Places the full range of speed fasteners
• Average cycle time of just one second

Air Pressure: 90 psi.
Cycle Time: Mandrel-to-Mandrel - 6 secs
Rivet Load - 1 sec
Rivet-to-Rivet - 1 sec
Dimensions:
(L x W x H)		 706 x 664 x 1100mm
Handtool Ubilical Lengths: 4 meter (3.6 meter usable length)
6 meter (5.6 meter usable length)
Weight: 468 lb. (entire system)
Standard Setup: Fastener setup supplied with each Autoload unit.
AUTOLOAD (HYDRO-PNEUMATIC)
• Automated fastener installation system
• Compact design suited for many applications
• Quick mandrel reload time
• Ergonomic nesting design for tool loading
• User-friendly operator interface
• Modular machine design
• Increases productivity, lower assembly costs
• Quick and simple integration into assembly lines
• Fasteners always available to operator
• Multiple handtool options to meet application constraints
• Places all Briv®, Chobert® and Rivscrew® Speed Fastening® systems
Product Specs Key Features



Fasteners | Installation Tools | Product Selectors | Contacts | Literature | Help | Customer Portal
Disclaimer | Copyright & Trademarks | Home
 Avdel® is an Acument Global Technologies Company
 Copyright © 2007 Acument Intellectual Properties, LLC