Home | Site map 

Fasteners: Threaded Inserts

Supersert® - Low Profile / Open End

Large View
Description
Specifications
Installation Tools
Material Sizes Product Series Data Sheets
Steel M3, M4, M5, M6, M8 0FB08 Metric



Description

The Supersert® threaded insert is a steel, low profile, plain bodied, expanding insert available in standard and metric thread sizes. An expanding insert is a single piece, which breaks into two pieces during installation. The lower threaded section of the insert draws up inside the upper sleeve section, causing the sleeve to expand 360o thus swaging the insert into the hole. Because the insert does not form a bubble on the backside of the application, an expanding insert can be used in blind hole applications. However, an expanding insert has less resistance to push out forces than a bubbling insert, which collapses into a bubble formation on the backside of the application.

The low profile flange of the Supersert® insert results in near flush installation and clamp up making it ideal for flush fitting, thin sheet and low load bearing applications.

Features

  • Not grip sensitive. Can be used in thick materials from 0.8mm (0.03"), including blind holes
  • Mechanical locking mechanism for applications requiring higher resistance to push out and pull out
  • Access needed from only one side of the application, for high speed assembly
  • Provide a female thread in application
  • Can be installed in pre-coated or post painted applications without damaging the surface
  • Low profile head allows near flush fit to application
Assembly Material
  • Metal to metal
Typical Applications
  • General light fabrication in thick materials where other inserts are unsuitable



Specifications

Find fasteners based on application parameters

Click part numbers to view suggested tools

Thread Part Number Material Grip
(e)		 Hole Size
+0.1/-0		 A
max.		 B
max.		 D
max.		 J
max.		 M
max.		 P
max.
M8 x 1.25 0FB08-70820 Steel 4.75-6.35 12.90 12.69 13.50 0.65 13.80 15.90 5.80
M3 x 0.5 0FB08-70313 Steel 0.80-1.60 4.77 4.75 5.50 0.50 5.70 10.50 4.50
M3 x 0.5 0FB08-70313 Steel 1.60-2.30 4.77 4.75 5.50 0.50 5.70 10.50 4.50
M3 x 0.5 0FB08-70313 Steel 2.30-3.20 4.80 4.75 5.50 0.50 5.70 10.50 4.50
M3 x 0.5 0FB08-70313 Steel 3.20-3.95 4.90 4.75 5.50 0.50 5.70 10.50 4.50
M3 x 0.5 0FB08-70313 Steel > 3.95 4.90 4.75 5.50 0.50 5.70 10.50 4.50
M4 x 0.7 0FB08-70414 Steel 0.80-1.60 6.35 6.34 7.00 0.55 7.20 11.60 5.40
M4 x 0.7 0FB08-70414 Steel 1.60-2.30 6.35 6.34 7.00 0.55 7.20 11.60 5.40
M4 x 0.7 0FB08-70414 Steel 2.30-3.20 6.40 6.34 7.00 0.55 7.20 11.60 5.40
M4 x 0.7 0FB08-70414 Steel 3.20-3.95 6.50 6.34 7.00 0.55 7.20 11.60 5.40
M4 x 0.7 0FB08-70414 Steel > 3.95 6.60 6.34 7.00 0.55 7.20 11.60 5.40
M5 x 0.8 0FB08-70514 Steel 0.80-1.60 7.14 7.13 7.90 0.60 8.20 11.60 5.40
M5 x 0.8 0FB08-70514 Steel 1.60-2.30 7.30 7.13 7.90 0.60 8.20 11.60 5.40
M5 x 0.8 0FB08-70514 Steel 2.30-3.20 7.40 7.13 7.90 0.60 8.20 11.60 5.40
M5 x 0.8 0FB08-70514 Steel 3.20-3.95 7.50 7.13 7.90 0.60 8.20 11.60 5.40
M5 x 0.8 0FB08-70514 Steel > 3.95 7.50 7.13 7.90 0.60 8.20 11.60 5.40
M6 x 1.0 0FB08-70616 Steel 0.80-1.60 9.53 9.41 10.30 0.65 10.60 13.30 5.40
M6 x 1.0 0FB08-70616 Steel 1.60-2.30 9.60 9.41 10.30 0.65 10.60 13.30 5.40
M6 x 1.0 0FB08-70616 Steel 2.30-3.20 9.70 9.41 10.30 0.65 10.60 13.30 5.40
M6 x 1.0 0FB08-70616 Steel 3.20-3.95 9.80 9.41 10.30 0.65 10.60 13.30 5.40
M6 x 1.0 0FB08-70616 Steel > 3.95 9.80 9.41 10.30 0.65 10.60 13.30 5.40
M8 x 1.25 0FB08-70820 Steel 1.60-2.30 12.70 12.69 13.50 0.65 13.80 15.90 5.80
M8 x 1.25 0FB08-70820 Steel 2.30-3.20 12.80 12.69 13.50 0.65 13.80 15.90 5.80
M8 x 1.25 0FB08-70820 Steel 3.20-4.75 12.90 12.69 13.50 0.65 13.80 15.90 5.80
M8 x 1.25 0FB08-70820 Steel 4.75-6.35 13.0 12.69 13.50 0.65 13.80 15.90 5.80
M8 x 1.25 0FB08-70820 Steel > 6.35 13.1 12.69 13.50 0.65 13.80 15.90 5.80
Thread Part Number Material Grip
(e)		 Hole Size
+0.1/-0		 A
max.		 B
max.		 D
max.		 J
max.		 M
max.		 P
max.


Thread Size Recommended
max torque
Nm max.		 Pull-out
kN		 Torque-to-turn
Nm min.		 Push-out
kN
M3 x 0.5 1.1 3.1 0.2 0.2
M4 x 0.7 5.1 3.6 0.3 0.3
M5 x 0.8 7.9 6.2 0.6 0.5
M6 x 1.0 12.4 7.5 1.1 0.5
M8 x 1.25 16.4 9.3 1.7 0.5



Installation Tools

Search tools by fastener part number

Part numbers are listed in order of base tool (no nose equipment), nose assembly, complete tool (includes nose equipment).
Size Series Installation Tools
(Standard setups. Contact Avdel® for options.)
74200 74201 74401
M3 0FB08 74200-12000
07555-09583
74200-00283		 74201-12000
07555-09583
74201-00283		 74401-01000
07555-09583
74401-00283
M4 0FB08 74200-12000
07555-09584
74200-00284		 74201-12000
07555-09584
74201-00284		 74401-01000
07555-09584
74401-00284
M5 0FB08 74200-12000
07555-09585
74200-00285		 74201-12000
07555-09585
74201-00285		 74401-01000
07555-09585
74401-00285
M6 0FB08 74200-12000
07555-09586
74200-00286		 74201-12000
07555-09586
74201-00286		 74401-01000
07555-09586
74401-00286
M8 0FB08 74200-12000
07555-09588
74200-00288		 74201-12000
07555-09588
74201-00288		 74401-01000
07555-09588
74401-00288





© Infastech® - Copyright & Trademarks | Disclaimer