Home | Site map

Fasteners: Speed Fasteners

Chobert® Double Flush

	Large View
	Brochure
	Description
	Specifications
	Installation Tools
	Interactive Demo

Materials	Sizes	Product Series	Data Sheets
Steel	3.2mm	01110-11294 01110-11708	Imperial - Metric

Description

The Double Flush Chobert® rivet is a Speed Fastening® rivet with countersunk head for use in exceptionally thin sheet materials. Based on the Avdel Chobert® design, the "Double Flush" is an ideal solution for fastening in the electronics industry and other applications where rear protrusion and rivet stem loosening are non preferred.

The "Double Flush" is placed into sheets that have countersunk bores on both sides. After installation, the placed rivet forms a flush fastening on both the front and rear of the application.

Avdel Speed Fastening® Systems are uniquely designed for rapid, reliable component assembly. At the end of each installation cycle, the next fastener is automatically delivered to the nose of the tool ready to repeat the assembly process.

Features

Flush surface on both sides of the joint*
Reduces excess space requirements within the chassis
Common hole form can be used throughout the chassis design to reduce complexity
Can be installed from either direction if accessible
Expands radially in the material during installation
Provides superior joint strength when compared to competitive technologies
One-piece fastener eliminates potential stem fall out that can cause electrical problems
Speed Fastening� rapid installation with magazine or bowl feed fasteners
* Rear sheet tail protrusion of installed fastener up to .020" is permissible

Typical Applications

Computer chassis
Electronic devices and components
Automotive applications
Domestic appliances
HVAC
General thin sheet fabrications where material cost and blindside space is at a premium

Specifications

Find fasteners based on application parameters

Chobert® Double Flush - 120^o Countersunk Head

Click part numbers to view suggested tools

Size	Part Number	Material	Grip (mm)	Hole Size (mm)	Shear kN¹⁾	Tensile kN¹⁾
3.2mm	01110-11294	Steel	2.41-2.92	3.28-3.33	1.018	1.519
3.2mm	01110-11708	Steel	2.00-2.67	3.28-3.33	1.018	1.519

1) typical values

Installation Tools

Search tools by fastener part number

Part numbers are listed in order of base tool (no nose equipment), nose assembly, mandrel, spring. There are no complete tool numbers that include nose equipment. All items must be specified separately.

Size	Series	Installation Tools (Standard setups. Contact Avdel® for options.)
Size	Series	727	753	7535	7536	7537	07539-03000	07539-03001	07539-03005	Autoload
3.2mm	01110-11708 01110-11294	07271-00200 07537-03100 07150-08004 07271-06630	07530-02100 07537-03100 07150-08004 07271-06630	07535-00011 07537-03100 07150-08004 07271-06630	07536-02100 07537-03100 07150-08004 07271-06630	07537-00200 07537-03100 07150-08004 07271-06630	07539-03000 07537-03100 07150-08004 07271-06630	07539-03001 07537-03100 07150-08004 07271-06630	07539-03005 07537-03100 07150-08004 07271-06630	1)

1) The Autoload system was developed to place Briv�, Rivscrew�, Rivscrew� PL and Chobert� speed fasteners in many standard sizes as well as the capability of custom engineered speed fasteners for your specific application. Please contact us for the range of sizes for each fastener.

Interactive Demo

• 01110-11708 & 01110-11294 - 120^o Countersunk head - Steel