Fasteners: Speed FastenersAvlug® - Dome Head
Description
The Avlug® speed fastener is a unique assembly system designed as secure,
easy-to-solder terminal posts for PCB's. Made from brass, the Avlug®
has a hot tin dipped coating to accept solder, while the knurled shank provides
a secure assembly by pressing into the application material. The Avlug®
rivet is not intended to fasten multiple sheets together and should only
be applied to single sheet thicknesses. Therefore, the application parameters
must meet the specified ranges to ensure proper installation and performance.
Speed fasteners are placed using a unique repetition mandrel system. Rivets
are loaded into specialist tooling and, during placement, the tool pulls
the mandrel through the rivet giving both axial and radial expansion (providing
clamp and hole fill). At the end of each cycle the next rivet is automatically
delivered to the nose piece ready for placement. For large volume applications
the fasteners can be bowl fed using automated equipment which gives continuous
feed with cycle times as low as 1.5 seconds.
Specifications Find fasteners based on application parameters
Installation Tools Search tools by fastener part numberPart numbers are listed in order of base tool (no nose equipment), nose assembly, mandrel, spring. There are no complete tool numbers that include nose equipment. All items must be specified separately.
Interactive Demo• 01107 - Dome head - Brass
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
© Infastech® |