|
Fasteners - Lockbolts Avdelok®
The Avdelok® lockbolt is a two piece assembly consisting of a bolt and collar. Although they are in the blind fastener family, they are not blind fasteners as access is required from both sides of the workpiece to install the bolts and collars. They provide higher shear strength, tensile strength, clamp load and vibration resistance than most other products in the Avdel® blind fastener family. Material options include aluminum, steel and stainless steel with diameter ranges of 3/16" to 3/8". The Avdelok® lockbolt fastening system relies on proper installation of the collar onto the bolt for maximum joint performance. The collar is pressed onto the bolt and material from the collar flows into the grooves of the bolt creating a virtually tamper proof joint. Additionally, as the application draws closer together, a flange is formed at the base of the collar next to the rear application sheet. This creates a load bearing surface, which absorbs the force of setting the fastener. Otherwise the setting force, or clamp load, might spread into the application and damage the material. The Avdelok® lockbolt has a breaknotch much like a breakstem rivet, which makes it a single grip fastener. This implies that the application hole size and grip range must meet the specified ranges to ensure proper installation and performance.
 Search tools by fastener part number
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
Avdel® is an Acument Global Technologies Company Copyright © 2007 Acument Intellectual Properties, LLC |